Download DBKL Guidelines for Car Parking and Internal Traffic Circ 2014 PDF

TitleDBKL Guidelines for Car Parking and Internal Traffic Circ 2014
File Size957.3 KB
Total Pages13
Document Text Contents
Page 2

GUIDELINES FOR CAR PARKING AND INTERNAL TRAFFIC CIRCULATION
2014



GUIDELINES FOR CAR PARKING AND INTERNAL TRAFFIC CIRCULATION
2



PART 1
GENERAL GUIDELINES FOR CAR PARK AND

TRAFFIC CIRCULATION PLAN SUBMISSION



1. Two (2) sets plans, signed by both the owner and
Engineer or Architect, are required.



2. All designed requirements set out in Part 2,3,4 and 5
must be complied.



3. The number of car parks provided must be
complied with the planning approval



4. All plans must be colored; car parking spaces and
driveway must be colored differently for clear
identification (including visitors and disabled car park
bay).



5. All dimensions e.g. width of driveways, size of
parking spaces, radius and gradient of ramps etc.,
must be indicated on plans.



6. Levels of the car parking floors shall be shown






7. Degree of angled car parking spaces must be
indicated.



8. All drawings of basements car parks must be
certified by the M & E Engineer as follows:



“I hereby certify that the minimum scale of fresh air

ventilation in conjunction with mechanical ventilation

shall be a minimum of six (6) air changes per hour,

and I take full responsibility for the proper installation

and performance of the same”.



9. Location for CCTV and safety mirror must be

indicated on plans.



10. Walk path 600 mm must be indicated on plans



Note: For more details refer Standard Drg. No.

JPIF/TLK/2014

Page 7

GUIDELINES FOR CAR PARKING AND INTERNAL TRAFFIC CIRCULATION
2014



GUIDELINES FOR CAR PARKING AND INTERNAL TRAFFIC CIRCULATION
7

































PART 4

ATTACHED

DRAWING

DIMENSION OF CAR PARKING STALLS

AND CIRCULATION AISLES

4.8 m

(i) One – way Traffic



2.4m

4.8 m

2.4m

DIAGRAM 1

90° Angled Parking

DIAGRAM 2

60° Angled Parking

DIAGRAM 3

45° Angled Parking

DIAGRAM 4

30° Angled Parking

4.8 m

4.8 m 4.8 m

2.4m
2.4m

Page 12

GUIDELINES FOR CAR PARKING AND INTERNAL TRAFFIC CIRCULATION
2014



GUIDELINES FOR CAR PARKING AND INTERNAL TRAFFIC CIRCULATION
12



5.1 Dimension of Stall


Minimum Stall Width : 3000mm (9’10”)

Minimum Stall Length

i) Angled Parking : 8000mm (26’3”)

ii) Parallel Parking : 9000mm (29’6”)

5.2 Dimension of Access way


Minimum Clear Width : 3500mm (11’6”)

5.3 Aisle Width (see drawing attached Part 5.0)


Parking Angle Aisle Width

90
o
11000mm (35’1”)

45
o
7500mm (24’7”)

Lateral 7500mm (24’7”)




5.4 Radius


Minimum inside radius of lane : 9000mm (29’6”)



5.5 Motorcycle Parking Space


The dimension for motorcycle parking space shall be

1000mm x 2000mm (3’3” x 6’7”). There is no specific

requirements on the width of access way, aisle etc. The

satisfactory arrangement of motorcycle parking spaces

shall be subjected to the approval by Dewan Bandaraya

Kuala Lumpur.















PART 5 STATIC REQUIREMENTS FOR LORRY AND

MOTORCYCLE

Similer Documents