Download ASD-LRFD for Wood Construction (Provisions for Wind and Seismic) PDF

TitleASD-LRFD for Wood Construction (Provisions for Wind and Seismic)
TagsFraming (Construction) Truss Lumber Wood
File Size1.7 MB
Total Pages33
Table of Contents
                            SPECIAL DESIGN PROVISIONS FOR WIND AND SEISMIC
	Table of Contents
	List of Tables
	1 DESIGNER FLOWCHART
		1.1 Flowchart
	2 GENERAL DESIGN REQUIREMENTS
		2.1 General
			2.1.1 Scope
			2.1.2 Design Methods
		2.2 Terminology
		2.3 Notation
	3 MEMBERS AND CONNECTIONS
		3.1 Framing
			3.1.1 Wall Framing
			3.1.2 Floor Framing
			3.1.3 Roof Framing
		3.2 Sheathing
			3.2.1 Wall Sheathing
			3.2.2 Floor Sheathing
			3.2.3 Roof Sheathing
		3.3 Connections
			3.3.1 Connections
	4 LATERAL FORCERESISTING SYSTEMS
		4.1 General
			4.1.1 Design Requirements
			4.1.2 Shear Capacity
			4.1.3 Deformation Requirements
			4.1.4 Boundary Elements
			4.1.5 Wood Systems Resisting Horizontal Seismic Forces Contributed by Masonry and Concrete
			4.1.6 Toenails
		4.2 Wood Diaphragms
			4.2.1 Application Requirements
			4.2.2 Deflection
			4.2.3 Shear Capacities
			4.2.4 Diaphragm Aspect Ratios
			4.2.5 Horizontal Distribution of Shear
			4.2.6 Construction Requirements
			4.2.7 Diaphragm Assemblies
		4.3 Wood Shear Walls
			4.3.1 Application Requirements
			4.3.2 Deflection
			4.3.3 Shear Capacities
			4.3.4 Shear Wall Aspect Ratios
			4.3.5 Shear Walls With Openings
			4.3.6 Construction Requirements
			4.3.7 Shear Wall Systems
	5 REFERENCES
		References
Zoom In
Zoom Out
Print
                        
Document Text Contents
Page 1

afpalog1.EPS


MANUAL FOR ENGINEERED
WOOD CONSTRUCTION

American Wood Council

American
Forest &

Paper
Association

2001 EDITION
SUPPLEMENT
Special Design
Provisions for
Wind and Seismic

06-02 20M

American Forest & Paper Association
American Wood Council
1111 19th Street, NW
Suite 800
Washington, DC 20036
www.awc.org
[email protected]

America's Forest & Paper People ®

Improving Tomorrow's Environment Today ®

®

®

ASD/LRFD
ALLOWABLE STRESS

DESIGN

LOAD AND RESISTANCE

FACTOR DESIGN

Seismic 2001 Cover.pmd 6/9/02, 7:48 PM1

Page 2

2001 EDITION
SUPPLEMENT
Special Design
Provisions for
Wind and Seismic

MANUAL FOR ENGINEERED
WOOD CONSTRUCTION

ASD/LRFD

Page 17

Figure 4.2.5.2.eps

Page 32

AMERICAN FOREST & PAPER ASSOCIATION

29

REFERENCES

Page 33

AMERICAN WOOD COUNCIL

30 REFERENCES

References

13. ASTM C840-01, Standard Specification for Appli-
cation and Finishing of Gypsum Board, ASTM, West
Conshocken, PA, 2001.

14. ASTM C841-99, Standard Specification for Instal-
lation of Interior Lathing and Furring, ASTM, West
Conshocken, PA, 1999.

15. ASTM C844-99, Standard Specification for Appli-
cation of Gypsum Base to Receive Gypsum Veneer
Plaster, ASTM, West Conshocken, PA, 1999.

16. ASTM C847-95(2000), Standard Specification for
Metal Lath, ASTM, West Conshocken, PA, 2000.

17. ASTM C926-98a, Standard Specification for Appli-
cation of Portland Cement Based Plaster, ASTM,
West Conshocken, PA, 1998.

18. ASTM C1032-96, Standard Specification for Woven
Wire Plaster Base, ASTM, West Conshocken, PA,
1996.

19. ASTM C1063-99, Standard Specification for Instal-
lation of Lathing and Furring to Receive Interior and
Exterior Portland Cement-Based Plaster, ASTM,
West Conshocken, PA, 1999.

20. ASTM C1280-99, Standard Specification for Appli-
cation of Gypsum Sheathing, ASTM, West
Conshocken, PA, 1999.

21. PS1-95 Construction and Industrial Plywood, United
States Department of Commerce, National Institute
of Standards and Technology, Gaithersburg, MD,
1995.

22. PS2-92 Performance Standard for Wood-Based
Structural Use Panels, United States Department of
Commerce, National Institute of Standards and Tech-
nology, Gaithersburg, MD, 1992.

1. AHA A194.1-85, Cellulosic Fiber Board, American
Hardboard Association, Palatine, IL, 1985.

2. ANSI/AHA A135.4-95, Basic Hardboard, American
Hardboard Association, Palatine, IL, 1995.

3. ANSI/AHA A135.5-95, Prefinished Hardboard Pan-
eling, American Hardboard Association, Palatine, IL,
1995.

4. ANSI A208.1-93, Particleboard, ANSI, New York,
NY, 1993

5. ASTM C28/C28M-01, Standard Specification for
Gypsum Plasters, ASTM, West Conshocken, PA,
2001.

6. ASTM C36/C36M-01, Standard Specification for
Gypsum Wallboard, ASTM, West Conshocken, PA,
2001.

7. ASTM C37/C37M-01, Standard Specification for
Gypsum Lath, ASTM, West Conshocken, PA, 2001.

8. ASTM C79/C79M-01, Standard Specification for
Treated Core and Non-treated Core Gypsum Sheath-
ing Board, ASTM, West Conshocken, PA, 2001.

9. ASTM C150-00, Standard Specification for Portland
Cement, ASTM, West Conshocken, PA, 2000.

10. ASTM C208-95(2001), Standard Specification for
Cellulosic Fiber Insulation Board, ASTM, West
Conshocken, PA, 2001.

11. ASTM C588/C588M-01, Standard Specification for
Gypsum Base for Veneer Plasters, ASTM, West
Conshocken, PA, 2001.

12. ASTM C630/C630M-01, Standard Specification for
Water-Resistant Gypsum Backing Board, ASTM,
West Conshocken, PA, 2001.

Seismic C5 Draft.pmd 4/22/02, 8:25 AM30

Similer Documents